The waterproof sealant can be used for sealing and waterproofing the terminals and joints of power cable accessories. It can also be used for bonding and sealing the joint of electrical equipment and heat shrinkable molding sleeve.

Product information:

Specification: 2.0 mm (thickness) x 30 mm (width) x 360 mm (length) or 50-200 g / roll, can be customized

Color: red, gray, black, white.

Appearance: soft self-adhesive tape or roll,

●-40℃到90℃

Packaging specification: 15kg / case

Product features:

High adhesive strength, excellent sealing and waterproof.

Good electrical performance. Weather and aging resistance.

Good flexibility, good flexibility, high bending resistance and low temperature mobile operation.

Easy to use and flexible.

Application scope:

Bonding and sealing of cold and heat shrinkable outdoor pipe joints of power cable accessories, as well as bonding of umbrella skirt and sealing and bonding parts used in gaoletou.

Bonding and sealing of electrical equipment connector (including lead outlet) and cable interface or lead outlet of electrical control equipment in aerospace, aviation, ship, rail transit and other fields.

instructions:

Clean the parts to be wrapped with glue, and there shall be no dust, oil, etc. Stretch the tape to 1 / 2 of the original width, 1 / 2 lap the tape, multi-layer winding, so that the thickness of the waterproof adhesive is not less than 2 mm and the width is about 5 cm, and use hand force to compact the closing position to check whether the adhesion is good.